Teach in magnetic sensor

Teach in magnetic sensor

Menu_Circle
Menu
  • Prerequisites
    • The status LED lights up green.
    • The LED button lights up white in day mode or blue in night mode.
Press this Button
  1. Press the LED button if no LEDs light up.
  2. To change to menu level 1, press and hold down the LED button for 8 seconds until it light up magenta and emits an acoustic signal.
  3. Press the LED button until it lights up light blue to proceed to the "Device services" menu.
  4. Press the LED button 3x for versions EA or CA.
  5. Press the LED button 5x for versions EB or CB.
  6. To change to menu level 2, press and hold down the LED button for 3 seconds.
  7. Press the LED button 3x until it flashes light blue and red to teach in the magnetic sensor.
  8. Hold down the LED button for 3 seconds.
    ➔ An acoustic signal will sound for approx. 4 s (alternating tone). A continuous tone will follow.
  9. Close the door.
    ➔ The magnetic sensor is taught in. This process takes some second to complete. After a successful teach in the locking elements move to the locking position and an acoustic signal is emitted.