Stain & Paint maintenance guide
Instructions for Sikkens water based Dip Impregnation (Primer) and Finish (Top Coat):
Stain finish (Top Coat) that needs to be rebuilt from raw wood:
- clean surface with clear water
- lightly sand with 220 grain sanding paper
- prime with Sikkens Cetol WP 511 in the required pigmentation (MAR...)
- drytime: approx. 30 minutes to touch at interior climate conditions (73,4°F) 55 – 60% rel. air humidity.
- to recoat: approx. 4 hours at interior climate conditions with an air circulation of
0,5 – 1,0 m/sec (2 – 3 feet /sec) - lightly sand with a 220 grain sanding sponge
- 2-3 stain finishes with Sikkens Cetol WF 9810-04-45 in the required pigmentation (MAR....).
lightly sand in between each coat of stain - drytime: at interior climate conditions (73,4°F) 55 – 60% rel. air humidity.
- Dust dry : approx. 60 minutes at interior climate conditions (77°F) 55 – 60% rel. air humidity.
- Sandable : approx. 3-4 hours
- Recoatable : approx. 3-4 hours at interior climate conditions with an air circulation of
0,5 – 1,0 m/sec (2 – 3 feet /sec)
Stain finish (Top Coat) on unblemished surfaces:
- clean surface with clear water
- lightly sand with 220 grain sanding paper
- 1-2 stain finishes with Sikkens Cetol WF 9810-04-45 in the required pigmentation (MAR....).
- lightly sand in between each coat of stain
- drytime: at interior climate conditions (73,4°F) 55 – 60% rel. air humidity.
- Dust dry : approx. 60 minutes at interior climate conditions (77°F) 55 – 60% rel. air humidity.
- Sandable : approx. 3-4 hours
- Recoatable : approx. 3-4 hours at interior climate conditions with an air circulation of
0,5 – 1,0 m/sec (2 – 3 feet /sec)